The C-LIGHT CL-IMC208SGP-SFP is an 8-port industrial managed PoE switch designed for harsh environments. Featuring a compact aluminum housing (95×63×46mm, 0.3kg) and an operating temperature range of -40°C to 75°C, it is ideal for smart transportation, industrial automation, and outdoor security applications. With 8×RJ45 PoE+ ports (30W per port, total power<240w)

Core Technical Advantages  

1. Industrial-Grade Hardware Design  

●Aluminum Housing & Thermal Optimization: IP40-rated metal casing resists EMI, while passive cooling reduces failure rates in high-temperature environments.  

●Wide-Temperature Operation (-40°C to 75°C): Suitable for extreme conditions in railways, oil fields, and outdoor base stations, etc.  

●High Reliability (MTBF>200,000 hours): Industrial-grade components ensure 24/7 stability.  

2. Redundant Power & Efficient PoE  

●Dual 48~57VDC Input (4-pin terminal): Redundant power backup eliminates single-point failures.  

●Smart PoE Management:  

●30W max per port (IEEE 802.3at compliant), total PoE budget ≤240W, powers IP cameras, wireless APs, and industrial sensors.  

●Configurable PoE prioritization optimizes power allocation during overloads.  

3. Flexible Networking & Management  

●Dual Gigabit SFP Uplinks: Supports single-mode/multi-mode modules for up to 80km transmission (module-dependent).  

L2+ Management Features:  

●VLAN, QoS, and STP/RSTP/MSTP protocols for industrial traffic optimization.  

●SNMPv3, Web/CLI management enables remote monitoring and troubleshooting.  

4. Low Power Consumption  

 ●Max system power 5W, PoE conversion efficiency ≥90%, reducing OPEX.  

Key Application Scenarios  

1. Intelligent Transportation Systems (ITS)  

●Powers traffic cameras, electronic signage, and vehicle sensors in extreme outdoor temperatures (-40°C to 75°C).  

2. Industrial Automation Networks  

●Ensures uninterrupted operation of PLCs and robotic arms via redundant power in factory floors.  

3. Surveillance Networks  

●Delivers PoE+ to 4K cameras and fiber backhaul for high-bandwidth, low-latency video transmission.  

4. Remote Area Connectivity  

●Integrates with solar power systems to provide PoE and fiber uplinks for rural IoT deployments.  

Why Choose C-LIGHT CL-IMC208SGP-SFP?  

1. Industrial Compliance  

●Meets IEC 61850-3 (power automation) and EN 50155 (railway) standards, with EMC/ESD certifications.  

2. Cost Efficiency  

●40% smaller size and 30% lower power consumption versus traditional industrial switches.  

3. Rapid Deployment  

●DIN rail/wall-mountable design enables installation within 5 minutes; hot-swappable modules simplify maintenance.  

Installation & Maintenance

1.Installation Tips:  

●Avoid direct exposure to rain or excessive dust (use with an enclosure).  

●Use shielded twisted-pair cables (Cat5e or higher) to minimize signal loss.  

2.Maintenance Strategy:  

●Monitor PoE load and temperature via SNMP to prevent overloads.  

●Inspect terminal block connections biennially for oxidation.  

If you are interested in the Industrial Managed PoE Switch 2-port , please contact us