Feature

• Efficient and non contact cleaning do not to scratch the fiber end face

• Compatible with virtually all connectors

• low cost, suitable for mass production

• The cleaning solvent pass the MSDS certification

• Internal air filter

• Injection channel (liquid drops + clean gas) and absorption channel (pollutants + gas),two independent channels

• Can choose to install optical microscope probe and test software

Working Principle

CLE-MAC-OX fiber cleaning machine uses special cleaning solvent and gas to clean the fiber end face.There aretwo independent channels,injection channel and absorption channel, in the machine. The injection channel spout special liquid and pure gas. The special cleaning solvent could rapidly dissolve oil and contamination and then the pure gas spray the mixture and make it floating. After that the absorption channel absorbs all the pollution mixture.

It is convenient to operate. Inserting the nozzle into the fiber port and pressing the switch the machine begins to work  ，and the whole process expend only a few seconds.

Performance

Cleaning Solvent

Notice:

1. The solvent is volatile ,keep it carefully.

2.  Do not use other solvent otherwise we will not provide warranty service.

Parameter

Standard Accessories