QSFP28 100G LR4 Optical Transceiver operating at 1310nm wavelength, this transceiver enables 100Gbps data transmission over 10km of single-mode fiber via an LC interface. It utilizes four independent 25Gbps lanes to deliver high-speed connectivity for data center interconnects (DCI) and telecommunications network infrastructure modernization.
0℃~70℃ 丨 TX>-3dBm 丨 RX：-10dBm~4.5dm 丨 < 3.5w丨Factory warranty |
CL100GQSFPLR4 |
●Supports 103.1Gb/s aggregate bit rate ●Power dissipation < 3.5W ●RoHS-6 compliant ●Commercial case temperature range of 0°C to 70°C ●Single 3.3V power supply ●Maximum link length of 10km on Single Mode Fiber (SMF) ●4x26Gb/s CWDM Transmitter: 4 channel 1270,1290,1310,1330nm DFB laser ●4x26G retimed electrical interface ●Duplex LC receptacles ●I2C management interface |
Specification | |||
| Number | CL100GQSFPLR4 | Vendor | C-LIGHT |
| Form Factor | QSFP28 | Data Rate Max | 103.125Gbps (4x 25.78Gbps) |
| Wavelength | 1310nm | Distance | 10km |
| Connector | 4 x LAN WDM | Media | SMF |
| Transmitter Type | -4dBm~4.5dBm | Receiver Type | PIN |
| TX Power | >-3dBm | Receiver Sensitivity | < -8dbm |
| Power Budget | 4dB | Receiver Overload | > -4.5dBm |
| Power Consumption | ≤3.5W | Extinction Ratio | >4dB |
| DDM/DOM | Supported | Industrial Temperature Range | 0 to 70°C |
| CDR | TX & RX Built-in CDR | FEC Function | No |
| Protocols | SFF-8661 Rev 2.5, SFF-8636 Rev 2.10a,IEEE 802.3bm-2015 | Warranty | 3 Years |
| System Test | |
|
|
| |
| Test video | ||
| Related Products | |||
| Number | CL100GQSFPLR4 | CL100GQSFPER4 | CL100GQSFPZR4 |
| Wavelength | LAN WDM 1310nm | LAN WDM 1310nm | LAN WDM 1310nm |
| Connector | LC | LC | LC |
Cable Distance (Max.) | 10km | 40km | 80km |
Data Rate | 103.125Gbps | 103.125Gbps | 103.125Gbps |
Transmitter Type | EML | EML | EML |
TX Power | > -3dBm | -2dBm~5dBm | 2dBm~6.5dBm |
Receiver Sensitivity | < -8dBm | < -21dBm | < -81dBm |
| Power Consumption | ≤ 3.5W | ≤ 5.5W | ≤ 6.5W |
| Application Graph |
 |
●Hot-pluggable QSFP28 form factor
